The Ford 8.8-inch is very similar to the General Motors (GM) 87⁄8-inch, 12-bolt axle. Some differential experts tell you that the Blue Oval engineers copied the 12-bolt design when they came up with the 8.8-inch axle. While the 8.8 is similar to the 12-bolt, it isn’t identical. Interestingly, the Ford axle uses the exact same size of tapered roller bearings as the GM 12-bolt. The Ford version uses larger axle shafts and different lube flow strategy. These axles did have metal axle tags similar to the 9-inch axles but they were slowly phased out as vehicle programs were updated. There are several reasons for this.
Ford cars are well-known for its performance and the quality. If all the components in your Ford works perfectly, you can enjoy a comfortable driving. In your vehicle, Ford Drive Axle Front is a contributing part which needs to be maintained perfectly. If you find any difference in the working of the Ford Drive Axle Front you need to get the good quality replacement part. You should maintain your vehicle in a perfect working condition to have a smooth drive. Nothing can be done if, the Ford Drive Axle Front does not work during the drive. You can avoid this problem by having a regular check on the working of the Ford Drive Axle Front. When you find any defect in the functioning of the Ford Drive Axle Front, you need to replace it as early as possible to get the best out of it.
Like most Ford axles, the 9-inch has a single hypoid ring gear mounting distance, so, unlike the Dana and GM axles that require unique differential carriers based on ratio, a single differential carrier works with all of the Ford ratios. Also, since this axle is used in so many circle-track race cars, the 9-inch enjoys an unparalleled availability of different gear ratios in the aftermarket.
Ford cars and trucks from 1968 on have an axle code on theCertification Plate, information on this plate can be used to determine if you vehicle is factory equippedwith a limited slip positraction rear end - differential. The certification plate can be located on the lockface of the left door edge. The plate layouts vary depending on the model year, but inevery case the axle code section is clearly marked as either "axle" or"ax". Ford axles codes contain one or two character. Any code beginningwith a letter (an alpha code) indicates the vehicle is equipped with a limited slipdifferential, except as shown below. Some pickup trucks with axle codes that are numbersonly (numeric codes) are equipped with limited slip differentials. If you need
|Ford Rear Axle Assembly Identification - Page 01|